Pumptec Quality

  • Simple. Reliable. Profitable. Performance.

    348UM50-8Pumptec are fast becoming the preferred pump system in 12V sprayers as result of our powerful 12V pump technology proven to withstand your workload and be there tomorrow to do it all over, again. Pumptec 12V pump systems deliver performance, simplicity, profit and reliability every day.

    Performance

    • True pressure and volume at the nozzle you can count on for label compliance and accuracy.
    • Consistent pressure for consistent spray patterns providing uniformity of coverage.
    • Pressure up to 150 psi powers through longer hose runs to deliver correct amounts of treatment far from truck.
    • More volume at the nozzle propels treatments to greater heights.

    Simplicity

    • No moving soft parts to wear and fail you on the job.
    • No connecting rods, crankshaft or submerged bearings needed in Pumptec’s design.
    • Single tool – a 3/16” hex wrench – required for easy, mess-free in-field repair.
    • Fewer moving parts to wear or need replacement.
    • Easy upgrade from low performance or unreliable pumps.

    Profit

    • More jobs completed per day with greater productivity of powerful pump system.
    • More time spraying treatments creating more revenue day after day.
    • More hours between service increases up time and equipment availability.
    • Lowest long-term cost achieved through superior design and quality materials.

    Reliability

    Our customers say it best:
    “Pumptec never quits on the job”
    Todd Leyse, President of Adam’s Pest Control, Inc.

  • Application Spotlight: 12V Pressure Washer

    Pressure WasherPumptec, once again, has created a market niche with their 12V pressure washers.

    Up until now, a pressure washer required either a 120V outlet or gas engine to do the job. If the job was remote, but did not allow use of a gas engine, there were no options. Pumptec has answered this with a range of 12V-powered washers for specific uses.

    Portable toilet cleaning

    CS-650 is an economical, ready to install pressure washer providing 1.3 gpm at 650 psi, 60 amps. This performance is ideal for portable toilets with an optimal combination of flow and pressure to clean, but not too much water to waste or pressure energy with splash back.

    CS-750 is a deluxe, ready to install kit providing 1.35 gpm at 750 psi, 65 amps. This is the original 12V pressure washer operators have relied upon for over a decade. The performance is optimal for cleaning portables without wearing your work home.

    PTC-1500 is the most powerful system we offer with 1.5 gpm, 1000 psi, 95 amp performance. The neat feature of this washer is auto-start with trigger pull. This power cleaning is available with a squeeze of the trigger and stops when the trigger is closed to save energy and reduce wear on the pump.

    Coil cleaning

    PTC-1500, our most powerful washer, can be placed in a vehicle and has the power to provide excellent cleaning performance up several stories of a building via an optional 100 ft pressure hose. With the optional chemical injector, the included spray gun can apply chemical at low pressure and high pressure rinse with a simple adjustment of the nozzle cover.

    Marine/dock side cleaning

    MDC-400, our highest flow model, is designed to be placed next to, and be powered by, the battery from a 12V boat lift. The performance of this washer is 3 gpm at 400 psi, 90 amps, featuring the same auto-start technology as the PTC-1500. There is enough flow and pressure to wash away the debris left behind by ducks and geese, and to rinse off boats to remove exotic species.

  • Pumptec Brings Value to Every Stakeholder

    Quality WorkPumptec Inc is proud of their made in USA products and continue to manufacture in Minnesota when others have sent work and technology out of the country.

    From the beginning, Pumptec has sought to bring value to every stakeholder, from our suppliers to our final customer. Our cultural values require we source our materials and processing, such as machining, from local suppliers whenever possible and keep the jobs in our community. We regard all entities involved in creating the Pumptec products as part of a family working cooperatively towards a common goal - the best products for our customers.

    Our home-grown technology permits Pumptec to respond quickly and completely to customer’s requirements with application specific product answers. Many of Pumptec’s patented system technology has its origin in customer requests that others were unable to fulfill. When a product is produced across an ocean or a border, the time to the customer’s hands increases. Market opportunities do not wait and Pumptec’s customers do not need to wait.

    Manufacturing matters.

3 Item(s)