Pump Series

  • Application Spotlight: Hard Surface Cleaner

    356UM60-8
    Pumptec Series 356U pump is the heart of most portable hard surface cleaners on the market.

    The Series 356U pump motor set provides the required 2 gpm at 1000 psi performance to spin the hard surface nozzle head in a powerful, compact package that easily fits in most portable designs.

    The benefits of Series 356U in this application include performance, simplicity and oil-less drive system. The flow of 2 gpm creates 1000 psi through two ‘02 nozzles common in most cleaning heads. Lower flow will not create 1000 psi resulting in lower cleaning impact and possibly inadequate rotation of the cleaning bar.

    356UM96

    The simplicity of design results in a compact pump set with few moving parts to wear. A single plunger and simple seal system are at the heart of the pump. With fewer moving parts, the amount of power transferred into cleaning energy is maximized.

    An oil-less pump design permits the pump set to be moved around and laid down without concern of oil leaking out and causing damage. Series 356U uses a special grease for lubrication of critical drive areas. The result is a high performance pump set that can withstand the movement and handling necessary to do the job.

  • Series 357U Plunger Pump

    357U Plunger PumpPumptec’s Series 357U is the only Pumptec pump intended for use on gas engines. The performance range is up to 4 gpm and up to 500 psi. Series 357U often includes a pillow block for use with a ¾” solid shaft engine.

    Features of Series 357U include:

    • Stainless steel plunger.
    • Stainless steel valves.
    • Extended-life U-cup seals.

    Series 357U pumps have been used as alternatives to diaphragm and roller pumps in portable sprayers. The extended life and durability of Series 357U, compared to these other pumps types, has resulted in greater revenues and reputation for the users.

    A plunger pump does not have a diaphragm that can burst resulting in a stoppage of work and requiring immediate maintenance. Also, unlike a roller pump, the performance of a plunger pump is consistent during the operating life. Roller pumps lose flow performance as they operate until it requires roller replacement.

    It is important to note that engine speed should not exceed 2400 rpm or shortened pump life will result.

  • Series 350U Plunger Pump

    350U Plunger PumpPumptec offers Series 350U plunger pump for applications in the performance range of up to  3 gpm and up to 1000 psi.

    Standard features of the pump include:

    • Stainless plunger
    • Stainless steel valves
    • U-cup seal design
    • Optimized priming capability

    Series 350U is becoming one of Pumptec’s most popular pumps because of its durability, size and performance capability.

    With the increasing popularity of 12V-powered pump systems, Series 350U has filled this critical performance niche. The compact size and motor options have made possible performance previously only available from larger, gas engine-powered pumps.

    The standard u-cup seal system handles the challenges of various water solutions and tolerates some level of debris in solution. Additionally, the suction capability of Series 350U permits mounting in areas away from the tank.

    Motor options: 12V, 24V, 120V and 230V.

  • Series 348U Plunger Pump

    348U Plunger PumpPumptec offers Series 348U plunger pump for applications in the performance range of up to  3 gpm and up to 1000 psi.

    Standard features of the pump include:

    • Stainless plunger
    • Stainless steel valves
    • U-cup seal design

    Series 348U has been one of Pumptec’s most popular pumps because of its durability, size and performance capability.

    Series 348U has been used in compact hard surface cleaning and hydrostatic testing equipment.  The compact size and motor options have made possible performance previously only available from larger, more expensive pumps.

    The standard u-cup seal system handles the challenges of various water solutions and tolerates some level of debris in solution. Additionally, the flow capability of Series 348U permits a range of uses for hand-carry pump equipment.

    Motor options: 12V, 24V, 120V and 230V.

  • Series 213C Plunger Pump

    213C Plunger PumpPumptec’s Series 213C plunger pump for applications in the performance range of up to .75 gpm and up to 1000 psi.

    Standard features of the pump include:

    • Ceramic plunger
    • Stainless steel valves
    • Cartridge seal design

    The most popular application for this pump is Flash Evaporative misting, or mist cooling. In this market, it is often used to provide flow for 2-4 misting rings on fans.

    Pumptec’s unique, compact design allows for a great amount of performance in a small package. Additionally, the Pumptec design permits mounting positions not possible with other type of pumps that rely upon oil to lubricate moving drive parts.

    Other markets include: High pressure chemical injection, low flow dispensing and odor control.

    Motor options: 12V, 24V, 120V and 230V.

Items 1 to 5 of 9 total

Page
  1. 1
  2. 2